透水胶粘石施工步骤：

第一步：胶粘石选材

1、经打磨过的筛选洗干净的各种颜色的水洗石

2、选择透明度好的胶粘石专用胶水

第二步：地面寄出要求

1、水泥强度要好，表面要光泽，不能太毛糙

2、水泥地坪一定要干燥，不能有潮湿有水份存在

第三步：准备水洗石与胶水混和

1、水洗石一定要晒干，不能有潮湿

2、比例要匀称

3、四合一材料混和在一起的时候限制在15分钟之内要把材料伴均匀

4、30分钟之内要把伴好的料摊铺完成，以此类推

5、三小时内表面不要让人去行走

6、避免在天气不好的时候去施工

7、施工完成到第二天最好盖上一层透明的朔料薄膜

Permeable Adhesive Construction Procedures:

Step 1:

Selection of Adhesive Stone Material

1. Selection of Washed Stone with Clean Colors after Grinding

2. Selection of Adhesive Stone Special Glue with Good Transparency

Step 2:

Floor requirements

1. Cement strength is good, the surface should be glossy, not too rough

2. Cement floors must be dry, not wet and moisture exists.

Step 3:

Before mixing washed stone with glue, washed stone must be dried, not damp

2, the proportion should be balanced

3, when mixing four-in-one material together, the material should be evenly mixed in 15 minutes

4, 30 minutes to complete the paving of the accompanied material, and so on

5, 3 hours on the surface do not let people walk

6, avoid bad weather. Waiting for construction

7. It's better to cover with a transparent plastic film the next day after completion of construction.